36+ Nice-Looking DIY Rope Light On a Budget to Beauty Your Home Decoration

DIY Rope Light On a Budget to Beauty 9
DIY Rope Light On a Budget to Beauty

DIY Rope Light – Cable lights, pipe lights, hose lights or the like, are part of decorative lights that are found in various types of buildings such as cafes, shops, food stalls, restaurants, even though coffee shops. But sometimes people are still worried/reluctant to install these lights to decorate the house. Why is that ? for fear that the appearance of the house can be considered as a shop or shop.

But now no longer, the house lights turned out to be a unique decoration in your home. So that makes the view of the residence to be more attractive and look slick. That also takes a little creativity in making the decoration can be integrated, so that it becomes a perfect home decoration lamp.

Easy DIY rope light in mounting applications used to decorate the decoration of a place or area to be more beautiful, romantic and memorable for those who see it, artistic lighting that has a positive effect, provides a warm and relaxed atmosphere, superior lighting can have a major impact to create memorable memories. forgotten, with perfect light shadows to attract attention, create attraction, create a unique atmosphere of an area, thus providing a reason for people to stay and to keep coming back.

It is suitable in pairs for decorative lighting, shop signboards, restaurants, cafes, restaurants, food court areas, ornamental parks and tree roads to shopping centers, malls, plazas, hotels, apartments, buildings, bridges, showrooms, counters, road dividers highway, etc. For that, look at the example DIY rope light on a budget that we have prepared below:

No need to worry, there are easy techniques so that this hose lamp can look good around the area of ​​the house. Therefore, make sure you have clearly learned all the steps:

Determine the Part of the House where You want to Place the Lights

If the hose lights are made for home decoration, of course, the placement does not have to be the same as the decoration lights that we encounter in other places, such as restaurants and cafes. As an option, it might be possible to place it on a wall, either inside or outside the room. Besides that, you can put it on the bottom wall of the ceiling/ceiling of the house.

In choosing where to install the hose lights can be based on the intensity of the light. Because of the room light is too bright, the effect of the hose lights can be reduced. Therefore, if the room already has sufficiently bright lighting, it is not recommended to decorate the house using this table lamp. But you can put it outdoors.

The selection of the place to install the hose lights must be right. Will that part of the room become the center of attention or vice versa? Such as a gathering place with family, neighbors/work colleagues, then the outer wall of the room should be the most possible place, right? Make sure it is not far from the nearest power source because the hose lights require electrical energy as the main power.

Prepare the Tools and Materials Needed

In order to give the maximum Glow effect, choose a single colored table lamp. Single color hose lights also give a warm and natural feel to your home, rather than using colorful cable lights. The length of the table lamp can be adjusted through the area/length of the field where the lamp is installed. Next, provide the tools / supporting materials

a. Nails, Hammer & Wooden Blocks (length range 10-15 cm)

The length of the nail is adjusted to the thickness of the wooden beam used. It is recommended not to use wooden blocks that are too thick. Why ? because later it will cause the gap is too wide between the wall and the cable lamp satirical decorator.

b. Holder

Actually it is possible to use adhesive tape, but Standard Holder is more recommended. These cable holders are intended to ensure that the cable lights stick perfectly to the wall surface.

c. Wooden Board

Wood planks are the finishing touch, so they are needed to make the hose lights look different from the hose lights in their usual places. The board should be smoothed to the surface because it will be the last display that tends to be seen. Giving a little painting or drawing a particular pattern may add to the decoration of the house lights.

But, if you install the lamp at the bottom of the ceiling/ceiling of the house, then the wooden board can be replaced with decorations such as decorations on the ceiling. So now you can give a little gap to put decorative lights on the part until it is able to refract the enchanting light, the Glow effect.

All images found here are believed to be in the “public domain”. We do not intend to infringe any legitimate intellectual right, artistic rights or copyright. All of the images displayed are of unknown origin. If you are the rightful owner of any of the pictures posted here, and you do not want it to be displayed or if you require a suitable credit, then please contact us and we will immediately do whatever is needed either for the image to be removed or provide credit where it is due.

nugraha

Leave a Reply

Your email address will not be published. Required fields are marked *